Page History

...

To have an additional source,

1. Copy Copy  /etc/shinken/modules/cfg-file-nagios.cfg  into an other cfg file name and configure itThen configure the source in the file it 
   • Remember that the module_name must be unique (Example: my_module_name)
     
     
   Copy  /etc/shinken/sources/cfg-file-nagios.cfg into an other cfg file name and configure it
   to enable the source and call the module configured in step 1.
   • Remember that the source_name must be unique.
     (Example:  my_source_name)
      
   • modules must be set to the new module you just define (my_module_name)
      
   • Then you must declare the cfg-file-nagios source_name source in the file /etc/shinken/synchronizers/synchronizer-master.cfg.
     

Migrating from Nagios to Shinken Enterprise is very easy

...

1. • add the source name in the line sources

   • sources syncui,cfg-file-shinken,active-dir,sync-vmware,

...

1. • cfg-file-nagios,discovery, my_source_name

define synchronizer {
	...

...

All you need to do is to set the following parameters:

• cfg_path                   /etc/nagios/nagios.cfg

Note: you must copy all your Nagios configuration into the Shinken Enterprise.

...

	sources syncui,cfg-file-shinken,active-dir,sync-vmware,cfg-file-nagios,discovery, my_source_name
	...
}