Page History

What IP range based tagger is done for

You can define a tagger that will use IP ranges to automatically add host templates to detected objects. The common tagger named ip-tags can load new ip range rules with modules.

How to define a new IP Range rule

For each IP range rule, you will need to define a new module and add it in the ip-tags configuration.

You can copy the sample module /etc/shinken/modules/ip-tag-dmz.cfg into a new file name and edit it:

  value          dc1
}

The properties are:

• module_name: must be unique in the modules
• module_type: must be equal to sync_ip_tag
• ip_range: the ip range you want to match
• method: how you want to modify your detected object:
  • replace: put the value if not another one is in place
    
  • append: add the value at the END of the host templates
  • prepend: add the value at on the BEGINING of the host templates
  • set: just the value, erase what was before.
• property: which host property to change. By default the property is "use" (host templates)
• value: which value to set/append/prepend/replace

Then you must edit the ip-tags tagger definition to link your new module in the file /etc/shinken/taggers/ip-tags.cfg:

Then you must restart your shinken-synchronizer daemon.