Page History

#===============================================================================
# WebUI
#===============================================================================
# Daemons that can load this module:
# - broker
# This module is the visualization interface
#===============================================================================



define module {

# Shinken Enterprise. Lines added by import core. Do not remove it, it's used by Shinken Enterprise to update your objects if you re-import them.
    _SE_UUID             core-module-2e0f08c45adc11e59a90080027f08538
    _SE_UUID_HASH        99215795c7e21b658e7c34989e872fcc
# End of Shinken Enterprise part

    #======== Module identity =========
    # Module name. Must be unique
    module_name               WebUI

    # Module type (to load module code). Do not edit.
    module_type               webui



    #======== Listening address =========
    # host: IP address to listen to.
    #       note: 0.0.0.0 = all interfaces.
    host                      0.0.0.0
    # port to listen
    port                      7767

    # HTTPs part, enable if you want to set the visualisation interface listen in HTTPs mode
    # disabled by default. Set your own certificates.
    use_ssl                   0
    ssl_cert                  /etc/shinken/certs/server.cert
    ssl_key                   /etc/shinken/certs/server.key


    #======== Security =========
    # auth_secret: secret key used to crypt cookie.
    # note: must be the same as the configuration UI
    auth_secret                 THIS SHOULD BE CHANGED BEFORE PRODUCTION

    # Allow or not HTML chars in plugins output
    allow_html_output           0

    # Use users ACL or enable all for everyone
    manage_acl                  1

    # Remote application authentication
    # if 1: allow the user to be load from a HTTP Header
    remote_user_enable          0

    # which HTTP header to get user name if remote_user_enable is 1
    remote_user_variable        X_Remote_User

    # if remote_user_enable is 1,
    # http_remote_user_case_sensitive to 1 enable case check on remote user login
    # http_remote_user_case_sensitive to 0 disable case check on remote user login
    # default value : 1, login is case sensitive
    remote_user_case_sensitive  1

    # Maximum output length for plugin output, 0=no limit
    max_output_length           0



    #======== Lang =========
    # Select the lang that will be used by default on the UIs
    # Currently managed:
    # -en    (english)
    # -fr    (francais)
    lang		                LANG



    #======== Paths =========
    share_dir                  /var/lib/shinken/share
    photo_dir                  /var/lib/shinken/photos

    #======== Modules =========
    # Modules loaded by the Visualisation interface
    # Available:
    # - Cfg_password          : check password from the user configuration
    # - auth-active-directory : check password from active directory
    # - Mongodb               : [mandatory] use to save user data (hive, favorites, ...)
    # - webui-enterprise      : [mandatory]
    # - sla                   : [mandatory] read sla from this module definition
    modules                   Cfg_password, Mongodb,webui-enterprise, sla
   

    #======== Metrology access ========= 
    	# This parameter defines the graphite server addresses for each realm used to create the metrology data. 
    	# The address preceded by the character * corresponds to the default graphite. 
    	# You can specify an address for a specific realm.
    # To define multiple graphite backends addresses, values must be separated by a comma 
    	# Ex. : graphite_backends France:127.0.0.1, Bordeaux:192.168.1.100:8080 
    	# Ex. : graphite_backends *:127.0.0.1, Paris:192.168.2.200:8080 
    	graphite_backends *:127.0.0.1

       
	
	# Before a graphite query is done, the graphite server is tested
    # Timeout for the alive timeout
    # default: 10 (seconds)
    metrology__ping_timeout    10

    # Timeout for graphite queries
    # default: 20 (seconds)
    metrology__query_timeout    20

    # If the test does fail, the graphite server will be exclude during this time
    # to avoid to lock query for timeouts
    # default: 120 (seconds)
    metrology__after_error_wait_before_retry   120


    #======== Broks getter in WebUI =========
    # These parameters allow some internal tuning in broks management in WebUI

    # Enable or disable late broks sets catchup
    # webui__broks_getter__activate_late_set_catchup                                1

    # Take extra broks sets to manage if more than this parameter sets are waiting
    # webui__broks_getter__nb_late_set_allowed_before_catchup                       10

    # Stop taking extra broks sets in catchup when we reach this number of broks
    # webui__broks_getter__catchup_broks_managed_by_module_in_a_catchup_loop        200000

    # Continue catchup if too much late broks sets remains after
    # webui__broks_getter__catchup_run_endless_until_nb_late_set_allowed_reached    0

    # Take the lock as soon as getter thread has some broks to manage
    # in order to attempt to reduce concurrent usage of CPU
    # webui__broks_getter__include_deserialisation_and_catchup_in_lock              0


    #======== Webui ExtendedAuthentication External configurationLog =========
    # TheLog line [OVERLOAD_FROM] /etc/shinken/_default/daemons/brokers/modules/webui.cfg must be present and must not be changed !the webui authentication history in a file

    # Enable authentication log or not.
    # by default: 0 (disabled)
    # You can overload value  /!\ Need be change in the webui_cfg_overload.cfg.
    file [OVERLOAD_FROM] /etc/shinken/_default/daemons/brokers/modules/webuiwebui_cfg_overload.cfg
    [OVERLOAD_FROM] /etc/shinken-user/configuration/daemons/brokers/modules/webui/# webui__log_users__enabled=0

    # File use for log authentication history
    #   /!\ Need be change in the file [OVERLOAD_FROM] webui_cfg_overload.cfg
}

    # webui__log_users__file_path=/var/log/shinken/webui/log_users.log

    # Add user name to log.
    # by default: 0 (disabled)
    #   /!\ Need be change in the file [OVERLOAD_FROM] webui_cfg_overload.cfg
    # webui__log_users__add_user_name=0


    #======== Extended configuration ========
    # The line [OVERLOAD_FROM] /etc/shinken/_default/daemons/brokers/modules/webui.cfg must be present and must not be changed !
    # You can overload value in the webui_cfg_overload.cfg.
    [OVERLOAD_FROM] /etc/shinken/_default/daemons/brokers/modules/webui.cfg
    [OVERLOAD_FROM] /etc/shinken-user/configuration/daemons/brokers/modules/webui/webui_cfg_overload.cfg
}

0.0.0.0 = all interfaces. 
	host 			0.0.0.0 
	# port to listen 
	port 			7767

remote_user_case_sensitive  1

    	#======== Metrology accessLang =========
    # ThisSelect parameter defines the graphitelang serverthat addresseswill forbe eachused realmby useddefault toon create the metrology data.UIs
    # TheCurrently addressmanaged:
 preceded by the character# *-en corresponds to the default graphite. (english)
    # You-fr can specify an address(francais)
 for a specific realm.
lang    # To define multiple graphite backends addresses, values must be separated by a comma
    # Ex. : graphite_backends France:127.0.0.1, Bordeaux:192.168.1.100:8080, Paris:http://192.168.2.200:200
    # Ex. : graphite_backends *:127.0.0.1, Paris:192.168.2.200:8080
    graphite_backends *:127.0.0.1

    # Before a graphite query is done, the graphite server is tested
    # Timeout for the alive timeout
    # default: 10 (seconds)
    metrology__ping_timeout    10

    # Timeout for graphite queries
    # default: 20 (seconds)
    metrology__query_timeout    20

    # If the test does fail, the graphite server will be exclude during this time LANG

# - auth-active-directory : check password from active directory
    # - Mongodb               : [mandatory] use to save user data (hive, favorites, ...)
    # - webui-enterprise      : [mandatory]
    # - sla                   : [mandatory] read sla from this module definition
    modules                   Cfg_password, Mongodb, webui-enterprise, sla

   #======== Extended configuration ========
   # The line [OVERLOAD_FROM] /etc/shinken/_default/daemons/brokers/modules/webui.cfg must be present and must not be changed !
   # You can overload value in the webui_cfg_overload.cfg.
   [OVERLOAD_FROM] /etc/shinken/_default/daemons/brokers/modules/webui.cfg
   [OVERLOAD_FROM] /etc/shinken-user/configuration/daemons/brokers/modules/webui/webui_cfg_overload.cfg