| Scroll Ignore | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||
|
Contexte
Il est possible de modifier la valeur par défaut des éléments.
- Les modifications se trouvent dans le dossier suivant : /etc/shinken-user/configuration/monitoring_policy/elements/elements_default_properties/
- ( des fichiers d'exemple sont disponibles dans le dossier suivant : /etc/shinken-user-example/configuration/monitoring_policy/elements/elements_default_properties/ )
- Chaque fichier à l'intérieur de ce répertoire correspond à un type d'élément.
| Anchor | ||||
|---|---|---|---|---|
|
Pour les Hôtes / Modèles d'hôtes et Clusters / Modèles de cluster
Les valeurs par défaut des hôtes se configurent dans le fichier suivant : /etc/shinken-user/configuration/monitoring_policy/elements/elements_default_properties/hosts_default_properties.cfg
Les valeurs modifiables sont :
( un fichier d'exemple est disponible ici : /etc/shinken-user-example/configuration/monitoring_policy/elements/elements_default_properties/hosts_default_properties.cfg )
Les valeurs modifiables sont :
- view_contacts ( les contacts qui peuvent voir l'élément ),
- view_contacts ( les contacts qui peuvent voir l'élément ),
- sla_warning_threshold ( seuil de warning pour les SLAs par défaut ),
- sla_critical_threshold ( seuil de critique pour les SLAs par défaut ),
- business_impact ( Impact métier ).
Voici son contenu :
| Code Block | ||||||
|---|---|---|---|---|---|---|
| ||||||
#**********************************************************************************
# This file contains DEFAULT VALUES for host properties that can be changed.
#
#**********************************************************************************
#==================================================================================
#======== default_view_contacts =========
# Describe which user will have access to hosts without view_contacts property
# (template inheritance included)
#
# Two values are possible:
# - nobody : (default) only shinken admin will be able to view then
# - everyone : all users will be able to see them
#[DEFAULT:host] view_contacts = nobody
#======== default_element_visibility_on_not_authenticated_view sla threshold =========
#[DEFAULT:host] sla_warning_threshold = 99.0
#[DEFAULT:host] sla_critical_threshold # Describe visibility on not authenticated view for all hosts and clusters
= 97.0
#==================================================================================
#======== default business_impact =========
# This property is used to set the importance we gave to this check for the business:
# values possible:
# 0 : * ( lower importance )
#
1 : **
# 2 : ***
# # Two values are possible:
3 : $$$$
# 4 : $$$$$
# # -5 0 : (default) all hosts and clusters are hidden in not: authenticated$$$$$$ view
( higher importance )
#[DEFAULT:host] business_impact # - 1 : all hosts and clusters are visible in not authenticated view
#[DEFAULT:host] element_visibility_on_not_authenticated_view = 0
#= 2
#============= default sla threshold =========
#[DEFAULT:host] sla_warning_threshold = 99.0
#[DEFAULT:host] sla_critical_threshold = 97.0
#==================================================================================
#======== default_thresholds_display =========
# Displays and describes the thresholds used by the command to compute the status (OK, WARNING or CRITICAL).
#[DEFAULT:host] thresholds_display =
#==================================================================================
#======== default business_impact =========
# This property is used to set the importance we gave to this check for the business:
# values possible:
# 0 : * ( lower importance )
# 1 : **
# 2 : ***
# 3 : $$$$
# 4 : $$$$$
# 5 : $$$$$$ ( higher importance )
#[DEFAULT:host] business_impact = 2
# |
Pour les Checks / Modèles de checks
Les valeurs par défaut des checks se configurent dans le fichier suivant : /etc/shinken-user/configuration/monitoring_policy/elements/elements_default_properties/checks_default_properties.cfg
( un fichier d'exemple est disponible ici : /etc/shinken-user-example/configuration/monitoring_policy/elements/elements_default_properties/checks_default_properties.cfg )
Les valeurs modifiables sont :
- business_impact ( Impact métier ).
Voici son contenu :
| Code Block | ||||||
|---|---|---|---|---|---|---|
| ||||||
#********************************************************************************** # This file contains DEFAULT VALUES for check properties that can be changed. # #********************************************************************************** #================================================================================== #======== default business_impact ========== # |
Pour les Checks / Modèles de checks
Les valeurs par défaut des checks se configurent dans le fichier suivant : /etc/shinken-user/configuration/monitoring_policy/elements/elements_default_properties/checks_default_properties.cfg
Les valeurs modifiables sont :
- business_impact ( Impact métier ).
Voici son contenu :
| Code Block | ||||||
|---|---|---|---|---|---|---|
| ||||||
#********************************************************************************** # This file contains DEFAULT VALUES for check properties that can be changed. # #********************************************************************************** This property is used to set the importance we gave to this check for the business: # values possible: # 0 : * ( lower importance ) # 1 : ** # 2 : *** # 3 : $$$$ # 4 : $$$$$ # 5 : $$$$$$ ( higher importance ) # same_as_parent : Same as its parents ( host or cluster ) #[DEFAULT:check] business_impact = same_as_parent #================================================================================== #======== default business_impact ========= # This property is used to set the importance we gave to this check for the business: # values possible: # 0 : * ( lower importance ) # 1 : ** # 2 : *** # 3 : $$$$ # 4 : $$$$$ # 5 : $$$$$$ ( higher importance ) # same_as_parent : Same as its parents ( host or cluster ) #[DEFAULT:check] business_impact = same_as_parent #================================================================================== |
Pour les Utilisateurs / Modèles d'utilisateurs
|
Pour les Utilisateurs / Modèles d'utilisateurs
Les valeurs par défaut des contacts se configurent dans le fichier suivant : /etc/shinken-user/configuration/monitoring_policy/elements/elements_default_properties/contacts_default_properties.cfg
( un fichier d'exemple est disponible ici : /etc/shinken-user-example/configuration/monitoring_policy/elements/elements_default_properties/contacts_default_properties.cfg )
Les valeurs modifiables sont :
- Autorisations sur l'UI de Visualisation :
- Action possible sur les éléments :
- acl_make_downtime,
- acl_make_acknowledge,
- acl_force_result_check,
- acl_force_retry_check,
- acl_show_external_url.
- Historique et SLA :
- acl_in_tab_history.
- acl_in_tab_history.
- Gestion des favoris :
- acl_share_private,
- acl_share_group,
- acl_share_everybody.
- Action possible sur les éléments :
- Autorisations sur l'UI de Configuration :
- Sur l'essai des checks :
- acl_try_check_on_poller,
- acl_try_check_on_synchronizer.
- Gestions de cookies
- authentication_cookie_validity_duration
- authentication_cookie_validity_duration
- Sur l'essai des checks :
Voici son contenu :
| Code Block | ||||||
|---|---|---|---|---|---|---|
| ||||||
#**********************************************************************************
# This file contains DEFAULT VALUES for contact properties.
#
#**********************************************************************************
#==================================================================================
# This property is used to authorize the contact to make a downtime in visualisation interface
# Possible values are [0 : disable] / [1 : enable]
#[DEFAULT:contact] acl_make_downtime = 1
# This property is used to authorize the contact to make a acknowledge in visualisation interface
# Possible values are [0 : disable] / [1 : enable]
#[DEFAULT:contact] acl_make_acknowledge = 1
# This property is used to authorize the contact to force a check result in visualisation interface
# Possible values are [0 : disable] / [1 : enable]
#[DEFAULT:contact] acl_force_result_check = 1
# This property is used to authorize the contact to ask immediate launch of the check in visualisation interface
# Possible values are [0 : disable] / [1 : enable]
#[DEFAULT:contact] acl_force_retry_check = 1
# |
Les valeurs par défaut des contacts se configurent dans le fichier suivant : /etc/shinken-user/configuration/monitoring_policy/elements/elements_default_properties/contacts_default_properties.cfg
Les valeurs modifiables sont :
Autorisations sur l'UI de Visualisation :- acl_make_downtime,
- acl_make_acknowledge,
- acl_force_result_check,
- acl_force_retry_check,
- acl_show_external_url.
Gestion des favoris :
Autorisations sur l'UI de Configuration :
Sur l'essai des checks :
- authentication_cookie_validity_duration
| Code Block | ||||||
|---|---|---|---|---|---|---|
| ||||||
#********************************************************************************** # This file contains DEFAULT VALUES for contact properties. # #********************************************************************************** #================================================================================== # This property is used to authorize the contact to make a downtime in visualisation interface # Possible values are [0 : disable] / [1 : enable] #[DEFAULT:contact] acl_make_downtime = 1 # This property is used to authorize the contact to make a acknowledge in visualisation interface======================== #================================================================================== # This property is used to authorize the user to try check on production platform. # Possible values are [0 : disable] / [1 : enable] #[DEFAULT:contact] acl_try_check_makeon_acknowledgepoller = 1 # This property is used to authorize the contactuser to force atry check resulton in visualisation interfaceconfiguration platform. # Possible values are [0 : disable] / [1 : enable] #[DEFAULT:contact] acl_forcetry_check_resulton_checksynchronizer = 1 # This property is used to authorize the contact to ask immediate launch of the check in visualisation interface # Possible values are [0 : disable] / [1 : enable] #[DEFAULT:contact] acl_force_retry_check = 1 #================================================================================================ #=============== # This properties is used to control the user access of the share in visualisation interface. # Possible values are all / none / read, create, organize, modify, delete #[DEFAULT:contact] acl_share_private = all #[DEFAULT:contact] acl_share_group = all #[DEFAULT:contact] acl_share_everybody = all #====================================================================== # This property is used to authorize the user to try check on production platform. # Possible values are [0 : disable] / [1 : enable] #[DEFAULT:contact] acl_try_check_on_poller = 1 # This property is used to authorize the user to try check on configuration platform. # Possible values are [0 : disable] / [1 : enable] #[DEFAULT:contact] acl_try_check_on_synchronizer = 1 #================================================================================== # This properties is used to control the user access of the share in visualisation interface. # Possible values are all / none / read, create, organize, modify, delete #[DEFAULT:contact] acl_share_private = all #[DEFAULT:contact] acl_share_group = all #[DEFAULT:contact] acl_share_everybody = all #================================================================================== # This property is used to set what to display in history tab in visualization interface. # Possible values are history_sla / history / sla #[DEFAULT:contact] acl_in_tab_history = history_sla #================================================================================== #================================================================================== # This property is used to set if the user is allowed to change the property "element_visibility_on_not_authenticated_view" in the user rights of the elements # in the user rights of the elements # Several possibilities: # - nobody : Nobody will be allowed to change the property "element_visibility_on_not_authenticated_view" # - everybody : Everybody will be allowed to change the property "element_visibility_on_not_authenticated_view" # - is_admin_shinken : (default) Only shinken administrators (is_admin=1) will be allowed to change the property # "element_visibility_on_not_authenticated_view" #[DEFAULT:contact] acl_change_element_visibility_on_not_authenticated_view = is_admin_shinken ============ # This property is used to set what to display in history tab in visualization interface. # Possible values are history_sla / history / sla #[DEFAULT:contact] acl_in_tab_history = history_sla #================================================================================== #================================================================================== # This property is used to set if the user is allowed to see the links (URL) on the supervision page. # Possible values are [0 : disable] / [1 : enable] # [DEFAULT:contact] acl_show_external_url = 1 #================================================================================== # This property is used to define the authentication validity time # unit : Minute, min value : 5 , max value : 5256000 # Default value : 5256000 ( 10 years ) # preconized value : 1440 ( 24h ) #[DEFAULT:contact] authentication_cookie_validity_duration = 1440 #================================================================================== |