| Scroll Ignore | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||
|
Contexte
Il est possible de modifier la valeur par défaut des éléments.
- Les modifications se trouvent dans le dossier suivant : /etc/shinken-user/configuration/monitoring_policy/elements/elements_default_properties/
- ( des fichiers d'exemple sont disponibles dans le dossier suivant : /etc/shinken-user-example/configuration/monitoring_policy/elements/elements_default_properties/ )
- Chaque fichier à l'intérieur de ce répertoire correspond à un type d'élément.
| Anchor | ||||
|---|---|---|---|---|
|
Pour les Hôtes / Modèles d'hôtes et Clusters / Modèles de cluster
Les valeurs par défaut des hôtes se configurent dans le fichier suivant : /etc/shinken-user/configuration/monitoring_policy/elements/elements_default_properties/hosts_default_properties.cfg
Les valeurs modifiables sont :
( un fichier d'exemple est disponible ici : /etc/shinken-user-example/configuration/monitoring_policy/elements/elements_default_properties/hosts_default_properties.cfg )
Les valeurs modifiables sont :
- view_contacts ( les contacts qui peuvent voir l'élément ),
- view_contacts ( les contacts qui peuvent voir l'élément ),
- element_visibility_on_not_authenticated_view ( Les éléments sont par défaut visibles ou pas sur les vues ne demandant pas d'authentification )
- Indisponible dans les modèles d'hôtes et dans les modèles de cluster ,
- sla_warning_threshold ( seuil de warning pour les SLAs par défaut ),
- sla_critical_threshold ( seuil de critique pour les SLAs par défaut ),
- threshold_display ( Texte par défaut de l'Affichage des seuils ).
- business_impact ( Impact métier ).
- template_can_be_applied_by_si_admin ( Modèle applicable par les administrateurs de SI ? ).
Voici son contenu :
| Code Block | ||||||
|---|---|---|---|---|---|---|
| ||||||
#**********************************************************************************
# This file contains DEFAULT VALUES for host properties that can be changed.
#
#**********************************************************************************
#==================================================================================
#======== default_view_contacts =========
# Describe which user will have access to hosts without view_contacts property
# (template inheritance included)
#
# Two values are possible:
# - nobody : (default) only shinken admin will be able to view then
# - everyone : all users will be able to see them
#[DEFAULT:host] view_contacts = nobody
#======== default_element_visibility_on_not_authenticated_view =========
# Describe visibility on not authenticated view for all hosts and clusters
#
# Two values are possible:
# - 0 : (default) all hosts and clusters are hidden in not authenticated view
# - 1 : all hosts and clusters are visible in not authenticated view
#[DEFAULT:host] element_visibility_on_not_authenticated_view = 0
#======== default sla threshold =========
#[DEFAULT:host] sla_warning_threshold = 99.0
#[DEFAULT:host] sla_critical_threshold = 97.0
#==================================================================================
#======== default_thresholds_display =========
# Displays and describes the thresholds used by the command to compute the status (OK, WARNING or CRITICAL).
#[DEFAULT:host] thresholds_display =
#==================================================================================
#======== default business_impact =========
# This property is used to set the importance we gave to this check for the business:
# values possible:
# 0 : * ( lower importance )
# 1 : **
# 2 : ***
# 3 : $$$$
# 4 : $$$$$
# 5 : $$$$$$ ( higher importance )
#[DEFAULT:host] business_impact = 2
#==================================================================================
|
Pour les Checks / Modèles de checks
Les valeurs par défaut des checks se configurent dans le fichier suivant : /etc/shinken-user/configuration/monitoring_policy/elements/elements_default_properties/checks_default_properties.cfg
Les valeurs modifiables sont :
- threshold_display ( Texte par défaut de l'Affichage des seuils ).
- business_impact ( Impact métier ).
Voici son contenu :
| Code Block | ||||||
|---|---|---|---|---|---|---|
| ||||||
#********************************************************************************** # This file contains DEFAULT VALUES for check properties that can be changed. # #********************************************************************************** # #======== default_template_can_be_applied_by_si_admin ========= # Possible values: # - 1 : (default) Host templates can be applied by the SI administrator. # - 0 : Host templates cannot be applied by the SI administrator. # #[DEFAULT:host] template_can_be_applied_by_si_admin = 1 #================================================================================== |
Pour les Checks / Modèles de checks
Les valeurs par défaut des checks se configurent dans le fichier suivant : /etc/shinken-user/configuration/monitoring_policy/elements/elements_default_properties/checks_default_properties.cfg
- ( un fichier d'exemple est disponible ici : /etc/shinken-user-example/configuration/monitoring_policy/elements/elements_default_properties/checks_default_properties.cfg )
Les valeurs modifiables sont :
- threshold_display ( Texte par défaut de l'Affichage des seuils ).
- business_impact ( Impact métier ).
Voici son contenu :
| Code Block | ||||||
|---|---|---|---|---|---|---|
| ||||||
#********************************************************************************** # This file contains DEFAULT VALUES for check properties that can be changed. # #********************************************************************************** #======================================= #======== default thresholds_display ========= # Displays and describes the thresholds used by the command to compute the status (OK, WARNING or CRITICAL). #[DEFAULT:check] thresholds_display = #======== default business_impact ========= # This property is used to set the importance we gave to this check for the business: # values possible: # 0 : * ( lower importance ) # 1 : ** # 2 : *** # 3 : $$$$ # 4 : $$$$$ # 5 : $$$$$$ ( higher importance ) # same_as_parent : Same as its parents ( host or cluster ) #[DEFAULT:check] business_impact = same_as_parent #================================================================= #======== default thresholds_display ========= |
Pour les Utilisateurs / Modèles d'utilisateurs
# Displays and describes the thresholds used by the command to compute the status (OK, WARNING or CRITICAL).
#[DEFAULT:check] thresholds_display =
#======== default business_impact =========
# This property is used to set the importance we gave to this check for the business:
# values possible:
# 0 : * ( lower importance )
# 1 : **
# 2 : ***
# 3 : $$$$
# 4 : $$$$$
# 5 : $$$$$$ ( higher importance )
# same_as_parent : Same as its parents ( host or cluster )
#[DEFAULT:check] business_impact = same_as_parent
#==================================================================================
|
Pour les Utilisateurs / Modèles d'utilisateurs
Les valeurs par défaut des contacts se configurent dans le fichier suivant : /etc/shinken-user/configuration/monitoring_policy/elements/elements_default_properties/contacts_default_properties.cfg
- ( un fichier d'exemple est disponible ici : /etc/shinken-user-example/configuration/monitoring_policy/elements/elements_default_properties/contacts_default_properties.cfg )
Les valeurs modifiables sont :
- Autorisations sur l'UI de Visualisation :
- Action possible sur les éléments :
- acl_make_downtime,
- acl_make_acknowledge,
- acl_force_result_check,
- acl_force_retry_check,
- acl_show_external_url,
- acl_acknowledge__automatic_deletion_condition__user_can_choose.
- Historique et SLA :
- acl_in_tab_history.
- acl_in_tab_history.
- Gestion des favoris :
- acl_share_private,
- acl_share_group,
- acl_share_everybody.
- Météo des services :
- acl__service_weather__owned__rights
- acl__service_weather__owned__nb_max_user_can_own
- acl__service_weather__non_owned__rights
- Action possible sur les éléments :
- Autorisations sur l'UI de Configuration :
- Sur l'essai des checks :
- acl_try_check_on_poller,
- acl_try_check_on_synchronizer.
- Gestions de cookies
- authentication_cookie_validity_duration
- authentication_cookie_validity_duration
- Affichage des seuils
- user__rights__property_permission__thresholds_display__can_edit
- Sur l'essai des checks :
- Edition des clusters
- acl__can_edit__clusters
- Edition des clusters
Voici son contenu :
| Code Block | ||||||
|---|---|---|---|---|---|---|
| ||||||
#**********************************************************************************
# This file contains DEFAULT VALUES for contact properties.
#
#**********************************************************************************
#==================================================================================
# - tab Generic
#==================================================================================
# - Authentication
#==================================================================================
#======== authentication_cookie_validity_duration =========
# This property is used to define the authentication validity time
# unit : Minute, min value : 5 , max value : 5256000
# Default value : 5256000 ( 10 years )
# preconized value : 1440 ( 24h )
#[DEFAULT:contact] authentication_cookie_validity_duration = 1440
#==================================================================================
# - tab authorizations
#==================================================================================
# - UI Configuration
#==================================================================================
#======================= ELEMENTS EDITION =========================================
#======== acl__can_edit__clusters =========
# Only for SI administrator.
# Shinken Administrator always have all the rights.
# Possible values:
# - 1 : SI administrator can edit Clusters.
# - 0 : (default) SI administrator cannot edit Clusters.
#[DEFAULT:contact] acl__can_edit__clusters = 1
#======================= TRY CHECK =========================================
#======== acl_try_check_on_poller =========
# This property is used to authorize the user to try check on production platform.
# Possible values:
# - 1 : (default) enable.
# - 0 : disable.
#[DEFAULT:contact] acl_try_check_on_poller = 1
#======== acl_try_check_on_synchronizer =========
# This property is used to authorize the user to try check on configuration platform.
# Possible values:
# - 1 : (default) enable.
# - 0 : disable.
#[DEFAULT:contact] acl_try_check_on_synchronizer = 1
#======================= THRESHOLD =========================================
#======== user__rights__property_permission__thresholds_display__can_edit =========
# This property is used to define if the user can edit the thresholds display on an Host, cluster, check.
# Possible values:
# - 1 : (default) enable.
# - 0 : disable.
#[DEFAULT:contact] user__rights__property_permission__thresholds_display__can_edit = 1
#======================= VIEWS =========================================
#======== acl_change_element_visibility_on_not_authenticated_view =========
# This property is used to set if the user is allowed to change the property "element_visibility_on_not_authenticated_view" in the user rights of the elements
# in the user rights of the elements
# Possible values:
# - nobody : Nobody will be allowed to change the property "element_visibility_on_not_authenticated_view"
# - everybody : Everybody will be allowed to change the property "element_visibility_on_not_authenticated_view"
# - is_admin_shinken : (default) Only shinken administrators (is_admin=1) will be allowed to change the property
# "element_visibility_on_not_authenticated_view"
#[DEFAULT:contact] acl_change_element_visibility_on_not_authenticated_view = is_admin_shinken
#==================================================================================
# - UI Visualisation
|
Les valeurs par défaut des contacts se configurent dans le fichier suivant : /etc/shinken-user/configuration/monitoring_policy/elements/elements_default_properties/contacts_default_properties.cfg
Les valeurs modifiables sont :
Autorisations sur l'UI de Visualisation :- acl_make_downtime,
- acl_make_acknowledge,
- acl_force_result_check,
- acl_force_retry_check,
- acl_show_external_url,
- acl_acknowledge__automatic_deletion_condition__user_can_choose.
Gestion des favoris :
Autorisations sur l'UI de Configuration :
Sur l'essai des checks :
Gestions de cookiesauthentication_cookie_validity_duration
- user__rights__property_permission__thresholds_display__can_edit
| Code Block | ||||||
|---|---|---|---|---|---|---|
| ||||||
#********************************************************************************** # This file contains DEFAULT VALUES for contact properties. # #********************************************************************************** #================================================================================== # This property is used to authorize the contact to make a downtime in visualisation interface # Possible values are [0 : disable] / [1 : enable] #[DEFAULT:contact] acl_make_downtime = 1 # This property is used to authorize the contact to make a acknowledge in visualisation interface # Possible values are [0 : disable] / [1 : enable] #[DEFAULT:contact] acl_make_acknowledge = 1 # This property is used to authorize the contact to force a check result in visualisation interface # Possible values are [0 : disable] / [1 : enable] #[DEFAULT:contact] acl_force_result_check = 1 # This property is used to authorize the contact to ask immediate launch of the check in visualisation interface # Possible values are [0 : disable] / [1 : enable] #[DEFAULT:contact] acl_force_retry_check = 1 #================================================================================== #======================= ACTIONS ========================================= #======== acl_make_downtime ========== # This property is used to authorize the user to try check on production platform the contact to make a downtime in visualisation interface # Possible values: # - 1 : (default) enable. # Possible values are- [0 : disable] / [1 : enable]. #[DEFAULT:contact] acl_try_check_on_pollermake_downtime = 1 #======== acl_make_acknowledge ========= # This property is used to authorize the user to try check on configuration platform used to authorize the contact to make a acknowledge in visualisation interface # Possible values: # - 1 : (default) enable. # Possible values are- [0 : disable] / [1 : enable]. #[DEFAULT:contact] acl_try_check_on_synchronizermake_acknowledge = 1 #===============================#======== acl_force_result_check ============ # This property is used to authorize the contact to force a check result in visualisation interface # Possible values: # - 1 : (default) enable. # - 0 : disable. #[DEFAULT:contact] acl_force_result_check = 1 #======== acl_force_retry_check ======================= # This propertiesproperty is used to controlauthorize the user accesscontact to ask immediate launch of the sharecheck in visualisation interface. # Possible values are: # all / none- /1 read, create, organize, modify, delete #[DEFAULT:contact] acl_share_private = all #[DEFAULT:contact] acl_share_group = all: (default) enable. # - 0 : disable. #[DEFAULT:contact] acl_shareforce_retry_everybodycheck = all1 #======================= HISTORY / SLA ========================================= #======== acl_in_tab_history ========== # This property is used to set what to display in history tab in visualization interface. in visualization interface. # Possible values: # - history_sla : (default) # Possible values are- history_sla # / history /- sla #[DEFAULT:contact] acl_in_tab_history = history_sla #======================= URL ========================================= #======== acl_show_external_url ========== # This property is used to set the right for an user to change the automatic deletion # condition of an acknowledge # Possible values are : # 0 : user doesn't have the right to choose # 1 : user has the right to choose if the user is allowed to see the links (URL) on the supervision page. # Possible values: # - 1 : (default) enable. # - 0 : disable. #[DEFAULT:contact] acl_acknowledgeshow__automatic_deletion_condition__user_can_chooseexternal_url = 01 #=================================== FAVORITE ========================================= #====== # This property is used to set if the user is allowed to change the property "element_visibility_on_not_authenticated_view" in the user rights of the elements # in the user rights of the elements # Several possibilities: # - nobody : Nobody will be allowed to change the property "element_visibility_on_not_authenticated_view" # - everybody : Everybody will be allowed to change the property "element_visibility_on_not_authenticated_view"=== acl_share_private ========= #======== acl_share_group ========= #======== acl_share_everybody ========= # This properties is used to control the user access of the share in visualisation interface. # Possible values: # - all : (default) # - none # - read # - is_admin_shinkencreate # - organize # - modify # - delete #[DEFAULT:contact] acl_share_private = all #[DEFAULT:contact] acl_share_group = all #[DEFAULT: (default) Only shinken administrators (is_admin=1) will be allowed to change the property # "element_visibility_on_not_authenticated_view"contact] acl_share_everybody = all #======================= WEATHER ========================================= #======== acl__service_weather__owned__rights ========= # This property is used to set if the user is allowed to create modify and manage his weather # Possible values: # - all # - none : (default) # - create # - modify # - manage #[DEFAULT:contact] acl_change_element_visibility_on_not_authenticated_view = is_admin_shinken #================================================acl__service_weather__owned__rights = none #======== acl__service_weather__owned__nb_max_user_can_own ========================== # This property allows you to specify the maximum number of service weather a user can have. # This property is implemented usedbecause topublished setweather ifreports theare usercalculated isat allowedregular tointervals, seeand thenot linkslimiting (URL)their onnumber thecan supervisionimpact pageperformance. # Possible values: # are [0 :- disable]Integer /between [10 :and enable]20 # [DEFAULT:contact] acl_show_external_url = 1 #===============================================================[DEFAULT:contact] acl__service_weather__owned__nb_max_user_can_own = 3 #========= acl__service_weather__non_owned__rights ========== # This property is used to define the authentication validity timegive a user rights to modify weather that they see but do not own. # unitPossible values: Minute, min value : 5 , max value : 5256000 # Default value : 5256000 ( 10 years ) # preconized value : 1440 ( 24h ) # - all # - none : (default) # - copy # - transfer_of_ownership # - delete # - restore # - permanent_delete #[DEFAULT:contact] authentication_cookie_validity_durationacl__service_weather__non_owned__rights = 1440none #======================= CONTACTS TEMPLATES ======================================= #=========== default_template_can_be_applied_by_si_admin ========= # This property is used to define if the user can edit the thresholds display on an Host, cluster, checkPossible values: # - 1 : (default) enable. # Possible values are- [0 : disable] / [1 : enable]. #[DEFAULT:contact] usertemplate_can_rightsbe_applied_propertyby_permission__thresholds_display__can_editsi_admin = 1 #================================================================================== |