Visualization UI

DASHBOARD

[Improvement]

The Dashboard status is no more limited to 3 widgets STATUS

The STATUS of any widget in the dashboard can be added to the computation of the Dashboard status. 

• • Select any STATUS widget in the Dashboard.
    • Click on the PLUS icon located on the widget title bar. 
      • A summary bar of this widget will be displayed near the status icon. 
      • The PLUS icon will become a MINUS icon. 
        
        
        
        

• • You can remove this STATUS by clicking on the MINUS icon.

• • • The MINUS icon will be replaced by PLUS icon.

Summaries displayed in tiles are no more linked to the status of the tile

• • You can display a summary (on a Widget SLA or a Status) without taking it into account for the status evaluation.
    • Adding a summary is now only to provide additional information on the tile.
  • To add a summary, click on the EYE icon.
    • The EYE icon will be replaced by a crossed EYE icon.
  • To remove it, click on the crossed EYE icon.
    • The crossed EYE icon will be replaced by the EYE icon.

The tile can be seen directly on the dashboard
 

 The tile is located on the top left corner of the dashboard:

• • • It is exactly the same tile displayed in the hive. It will prevent you to go back and forth between the hive and the dashboard in order to see the status and summary displayed.
    • Any change (Dashboard status or adding/removing a summary) will be seen immediately in the tile. 

In edit mode, Widgets catalog is now in a panel on the right

The widget catalog is in vertical, the user can see more widget without scrolling.

Responsive design

The layout of the Dashboard is adapting to the size of the web browser.

Click on the widget in the status bar of the Dashboard to focus your screen on it

It is useful in 2 cases:

• • Click on the widget in the status bar of the Dashboard will help you to locate it, if for example the dashboard is too big to be totally displayed on your screen () 
  • If the Widget is not totally viewable, it is quicker to click on the title than moving the mouse on slide bar.

The screen focus on the new widget created

User doesn't have to search the added widget by itself

The widget layout has been improved

• • Limits of the dashboard is now displayed (a grey background, surrounded by a black Area).
  • The size of the dashboard can be increased by dragging a widget on the left or bottom edge.
  • Dragging a widget don't immediately change the layout of widget:
    • Moving a widget outside the visible part will now generate an automatic scroll of the dashboard. The widget will always be visible.
    • A shadow will be displayed, showing the future position 
    • When you release the dragged widget on the spot of another one, the latter shifts to the bottom.

DETAIL PANEL

[Improvement]

The user that have set the acknowledge is displayed 

• • Once the acknowledge is set
    • A purple area surround the Submit/Remove acknowledge button
    • Inside this area is displayed:
      • The user name that set the acknowledge,
      • The time with it has been set at.
    • A hover show the comment that the user has written.

Tab Historic is updated in real time 

• • The historic of a host is now updated on every refresh of the detail panel.
  • The name of the user that set the acknowledge is displayed on the historic

A padlock and forbidden message is displayed for unauthorized host

• • if a user try to open a host he doesn't have access to
    • The detail panel will be empty 

    • The text "   " will be displayed with a padlock.

[Bugs]

Tab Summary: Host template name too long

• • In the host template area, if the host template name is longer than the outline of the box, this latter is now automatically re-sizing. 

Checks Tab: Setting or removing an acknowledge on a host refresh the checks tab

• • When an acknowledge is set on a host, all checks will automatically have the acknowledge context.
    • If the tab checks is opened, it be automatically refresh to show the acknowledge context on all checks.

WIDGETS

[Improvement]

ALL WIDGETS: Instead of hiding non-authorized host, Widgets will show the name of the host adding a padlock

We changed this behavior to provide more information to Shinken user

• • If a user has been able to configure a host but has no more right to see it, it will be easier to discuss with supervision administrator to check if it is not an error. 
  • A user may need to see a cluster but doesn't have access to host composing. This feature will let him understand why the cluster is down and discuss with the right person.
    
    

  • Je ne peux pas créer le screenshot à partir de ma démo 

[Bugs]

Widget Graph

• • A check with a name containing a space wasn't displayed.
  • If there is no value for a metric during a period, the graphic was not showing this period. Activity period were directly concatenated.
    • (For example, if the check has run up to 10:00, then stop 1 hour then restart, it was displaying a continue graphic)
    • It will now show a period with metric set to 0

Widget Root Problem

• • When we keep mouse over an element in the list of root problems widget and the detail panel is opened, the tooltip describing the host was displayed over detail panel, hiding it.

Il manque le screenshot du bugg d'avant 

LISTS

[Improvement]

Overview: a new list

The behavior of list has been improved to get a better user experience.

• • The previous filter panel was not fun!
  • csf
  • fsd
  • sdf

Change done on the list are save.

• • if the user make some 

Hiding/Showing column

• • Each column can be removed or added depending of the user need
  • You can do it in to way
    • In a column, open the column menu and click on the entry hide the column
    • In the right side of the list, open 

Moving column

Docking column on the right side

Sorting column

Multi filter

Quick filter

Opening the detail panel

Configuration UI

MENU

To improve the efficiency of the Configuration UI, the menu bar will provide more dynamic information.

Home page

The configuration home page now offers a summary of your current Stagging configuration. It also shows new/changed elements that were detected by the automatic modules, so you can validate them.

• The home page is automatically refreshed every 30 seconds.
  
  
• Elements summary table is added (number of elements, automatically detected new and modified elements)
  • Element's Type name are now hyperlinks.
  • Clicking on it will display the list page of this element's type.
    
    
    
• It displays the list of Automatic Detection Modules.
  • The fact that a Source is enabled is now differentiated from its status (running well or not, for example):
    
    • 2 columns (Enabled and State) are now present.

    • A source can be Enabled or not in its configuration file (cf module description in the chapter Automatic+Detection+modules).

    • State column is filled if the source is enabled.

• Buttons (Add host, Show hosts, Show sources)  on the home page were useless and have been removed.

Elements Page

Global Layout modification

Huge improvements in the Elements page: 

They are now more clear and dynamic.

• The Cancel button has been added (to clearly indicate to the user how to leave the page without taking into account modification done in the element)
  
  
  
  
   
• Configuration is now far more natural: If a property value is not set in the element, default or template inherited values of element's fields are now displayed.
  They are colored in purple.
  
  
  
• Mandatory fields are pointed out by a red star near to the label.
  
  
  
  
• The type and the name of the element are always displayed on the top of the page.

  
   

• For elements that can have templates to inherit from (hosts, checks, contacts):
  • Template values will be shown on the right of the value property.
  • Inherited Template values will be used only if the property is not set in the element (in the example, Business impact is set to 2, so the inherited value 1 from Shinken Host is displayed but not applied)
  • Adding/removing a template will automatically recompute all the inherited property with the value.
    
    
    

• 

  A help window for each property field is displayed on the right of the screen.
  Hovering the property will automatically fill the help area if help text is available for the property.
  
  
  

Improvement too, on List pages displaying all elements of a type:

• Automatic changes proposal are now easier to see. Buttons design changed by separating;
  • the button to add a new elements and the button to see/validate differences from the automatic detection modules.
  • for both button, text and color buttons will change if Automatic Modules detected updates.
    • Buttons are gray and inactive:  
      
      
      
      
      
      
       
    • Button "No New element" has been replaced by "see new hosts [ X ]" and is now yellow
      
      
      
      
      
      
       
    • Button "No selected differences" has been replaced by "See proposed differences (X elements)" and is now green: 

• Massive actions are now available on elements.
  • All elements can now be selected (only the elements with automatic changes proposal were selectable before) 
  • massive actions can now be launched:
    • Enable: allow the element to be send in the monitoring production environment.
    • Disable: do not send this element to the production environment.
    • Delete: delete this element from the Staging database.
    • Duplicate: create a clone of the element with all its property, and the "(copy)" suffix at the end of its name.
      
       

• New filters are also available:
  • All pages now have a filter by name option.
     
  • Depending on the type of the element, more filter are available.
    • Host: filter by template 
    • Checks: filter by template and filter by pack
    • Contacts: filter by template

Clusters/Cluster Pages

Now the clusters have their own list and edition page. They are separated from the hosts page.

They can have a name, a definition rule and the same notification options as the hosts.

Host/Host template Pages

The host page inherit from the global layout modification (default and template display, ...) and have also special improvements:

• In the generic tab, when you link a template to your host, the numbers of checks linked to a template are shown aside the template name.
   
  
  
• Checks linked to your templates are also displayed in a specific "Checks [ X ]" tab
  
  • where X is the total number of checks this host will inherit.
  • you can see the checks name, their contact groups, the check command
  • You can also click on "try this check" button to launch a check on this host. You will see:
    •  the command (definition and expanded command line),
    • the data used to launch the check command,
    • the return from the plugin execution
      
      
      
      
      
       

• a new field "Checks to exclude" is available in the advanced tab.
  
  It's a comma separated list of Check names you do not want to be present in this specific host.

Check/Check template Pages

The check page inherit from the global layout modification (default and template display, ...) and have also special improvements:

• Properties to link checks to hosts, hostgroups and host templates are now with explicit labels.
  • Check Templates to inherit
  • Apply on Host Groups
  • Apply on Host Templates
    
    
    
    

• The "Duplicate for each host data" parameter was added to the "Monitoring" tab.
  
  
  

• The "Definition order" parameter was added to the "Advanced" tab.

To be applied Page

The "To be applied" page did have several improvements. The focus is to facilitate and allow the user to easily see the main differences between its staging database and the production database:

• Modifications to apply to the production environment are listed:
  • The new, changed and removed elements are automatically displayed on the page right panel.

• • For new element, or changed elements, clicking on the name will directly open the element page.
  • On the changed elements:
    • The full list of changed property are displayed per element
    • you can unfold all diff tables of your elements if you want, or unfold it one element by one element
      
      

• You can filter the modifications list by using the two filters located in the left panel:
  • Filter by Status (new, changed, removed)
  • Filter by Type (host, checks, command, ....). Only the type with elements will be display on this filter.
  • Both status and type filter can be applied, to only see "new hosts" filter for example

• Only two buttons are now available on the left:

• • Check: check the current staging database
  • Apply: 
    • will check the current staging database, 
    • erase the production database with the staging database, 
    • Reload your monitoring production daemons.