Edit and add new network scan list
You can list the current network scan in the Discovery menu.
You can enable new scan with the Add new scan button.
You must set up the following parameters:
- Name
- IP range: must match a nmap command range definition
- Scan interval, in minutes
- You can setup notes about this scan
Adding a new scan will automatically enable it and your new hosts or your new tags will appears in a few minutes.
Add new port to host template rule
Here is an example of how to set the ftp host template host for anything that is detected by nmap with the TCP/21 port open:
There are three main parts for a rule:
- discoveryrule_name: should be unique
- creation_type: should be host
- openports: regexp about the port that will be match. The ^ and $ is for the regexp thing, so 21 and only 21 will be match, and not 210 for example.
- +use: This mentions the template from which the generated object will inherit from. You can add as many properties as you want.
define discoveryrule {
discoveryrule_name FtpRule
creation_type host
openports ^21$
+use ftp
} |