#===============================================================================
# WebUI
#===============================================================================
# Daemons that can load this module:
# - broker
# This module is the visualization interface
#===============================================================================



define module {

# Shinken Enterprise. Lines added by import core. Do not remove it, it's used by Shinken Enterprise to update your objects if you re-import them.
    _SE_UUID             core-module-2e0f08c45adc11e59a90080027f08538
    _SE_UUID_HASH        99215795c7e21b658e7c34989e872fcc
# End of Shinken Enterprise part

    #======== Module identity =========
    # Module name. Must be unique
    module_name               WebUI

    # Module type (to load module code). Do not edit.
    module_type               webui



    #======== Listening address =========
    # host: IP address to listen to.
    #       note: 0.0.0.0 = all interfaces.
    host                      0.0.0.0
    # port to listen
    port                      7767

    # HTTPs part, enable if you want to set the visualisation interface listen in HTTPs mode
    # disabled by default. Set your own certificates.
    use_ssl                   0
    ssl_cert                  /etc/shinken/certs/server.cert
    ssl_key                   /etc/shinken/certs/server.key


    #======== Security =========
    # auth_secret: secret key used to crypt cookie.
    # note: must be the same as the configuration UI
    auth_secret                 THIS SHOULD BE CHANGED BEFORE PRODUCTION

    # Use users ACL or enable all for everyone
    manage_acl                  1

    # Remote application authentication
    # if 1: allow the user to be load from a HTTP Header
    remote_user_enable          0

    # which HTTP header to get user name if remote_user_enable is 1
    remote_user_variable        X-Remote-User

    # if remote_user_enable is 1,
    # http_remote_user_case_sensitive to 1 enable case check on remote user login
    # http_remote_user_case_sensitive to 0 disable case check on remote user login
    # default value : 1, login is case sensitive
    remote_user_case_sensitive  1


    #======== Lang =========
    # Select the lang that will be used by default on the UIs
    # Currently managed:
    # -en    (english)
    # -fr    (francais)
    lang		                LANG



    #======== Paths =========
    share_dir                  /var/lib/shinken/share
    photo_dir                  /var/lib/shinken/photos

    #======== Modules =========
    # Modules loaded by the Visualisation interface
    # Available:
    # - Cfg_password          : check password from the user configuration
    # - auth-active-directory : check password from active directory
    # - event-manager-reader  : activate the event manager page to show event (do not forget to activate the module in your broker to write data)
    # - Mongodb               : [mandatory] use to save user data (hive, favorites, ...)
    # - webui-enterprise      : [mandatory]
    # - sla                   : [mandatory] read sla from this module definition
    modules                   Cfg_password, Mongodb, webui-enterprise, sla, event-manager-reader


    #======== Metrology access =========
    # Multi-realm graphite parameter
    # The character * means all realm and subrealms that the broker manage. If you want to specify only one realm you can replace * by the realm name.
    # For multiple realms, add them separated by a comma
    # Ex. : graphite_backends	      France:127.0.0.1, Bordeaux:192.168.1.100, Paris:192.168.2.200
    graphite_backends	      *:127.0.0.1

    # Before a graphite query is done, the graphite server is tested
    # Timeout for the alive timeout
    # default: 10 (seconds)
    metrology__ping_timeout    10

    # Timeout for graphite queries
    # default: 20 (seconds)
    metrology__query_timeout    20

    # If the test does fail, the graphite server will be exclude during this time
    # to avoid to lock query for timeouts
    # default: 120 (seconds)
    metrology__after_error_wait_before_retry   120


    #======== Broks getter in WebUI =========
    # These parameters allow some internal tuning in broks management in WebUI

    # Enable or disable late broks sets catchup
    # webui__broks_getter__activate_late_set_catchup                                1

    # Take extra broks sets to manage if more than this parameter sets are waiting
    # webui__broks_getter__nb_late_set_allowed_before_catchup                       10

    # Stop taking extra broks sets in catchup when we reach this number of broks
    # webui__broks_getter__catchup_broks_managed_by_module_in_a_catchup_loop        200000

    # Continue catchup if too much late broks sets remains after
    # webui__broks_getter__catchup_run_endless_until_nb_late_set_allowed_reached    0

    # Take the lock as soon as getter thread has some broks to manage
    # in order to attempt to reduce concurrent usage of CPU
    # webui__broks_getter__include_deserialisation_and_catchup_in_lock              0


    #======== Extended configuration ========
    # The line [OVERLOAD_FROM] /etc/shinken/_default/daemons/brokers/modules/webui.cfg must be present and must not be changed !
    # You can overload value in the webui_cfg_overload.cfg.
    [OVERLOAD_FROM]            /etc/shinken/_default/daemons/brokers/modules/webui.cfg
    [OVERLOAD_FROM]            /etc/shinken-user/configuration/daemons/brokers/modules/webui/webui_cfg_overload.cfg

}

	#======== Listening address ========= 
	# host: IP address to listen to. 
	# note: 0.0.0.0 = all interfaces. 
	host 			0.0.0.0 
	# port to listen 
	port 			50100 

	# HTTPs part, enable if you want to set the visualisation interface listen in HTTPs mode
    # disabled by default. Set your own certificates.
    use_ssl                   0
    ssl_cert                  /etc/shinken/certs/server.cert
    ssl_key                   /etc/shinken/certs/server.key

    #======== Security =========
    # auth_secret: secret key used to crypt cookie.
    # note: must be the same as the configuration UI
    auth_secret                 AUTH-SECRET-22316-4472-3256
 
    # Use users ACL or enable all for everyone
    manage_acl                  1
 
    # Remote application authentification
    # if 1: allow the user to be load from a HTTP Header
    remote_user_enable          1
 
    # which HTTP header to get user name if remote_user_enable is 1
    remote_user_variable       X-Forwarded-User
 
    # if remote_user_enable is 1,
    # http_remote_user_case_sensitive to 1 enable case check on remote user login
    # http_remote_user_case_sensitive to 0 disable case check on remote user login
    # default value : 1, login is case sensitive
    remote_user_case_sensitive  1

 	#======== Lang =========
    # Select the lang that will be used by default on the UIs
    # Currently managed:
    # -en    (english)
    # -fr    (francais)
    lang                        LANG

    #======== Paths =========
    share_dir                  /var/lib/shinken/share
    photo_dir                  /var/lib/shinken/photos

	#======== Modules =========
    # Modules loaded by the Visualisation interface
    # Available:
    # - Cfg_password          : check password from the user configuration
    # - auth-active-directory : check password from active directory
    # - event-manager-reader  : activate the event manager page to show event (do not forget to activate the module in your broker to write data)
    # - Mongodb               : [mandatory] use to save user data (hive, favorites, ...)
    # - webui-enterprise      : [mandatory]
    # - sla                   : [mandatory] read sla from this module definition
    modules                   Cfg_password, Mongodb, webui-enterprise, sla, event-manager-reader

	#======== Metrology access =========
    # Multi-realm graphite parameter
    # The character * means all realm and subrealms that the broker manage. If you want to specify only one realm you can replace * by the realm name.
    # For multiple realms, add them separated by a comma
    # Ex. : graphite_backends         France:127.0.0.1, Bordeaux:192.168.1.100, Paris:192.168.2.200
    graphite_backends         *:127.0.0.1
 
    # Before a graphite query is done, the graphite server is tested
    # Timeout for the alive timeout
    # default: 10 (seconds)
    metrology__ping_timeout    10
 
    # Timeout for graphite queries
    # default: 20 (seconds)
    metrology__query_timeout    20
 
    # If the test does fail, the graphite server will be exclude during this time
    # to avoid to lock query for timeouts
    # default: 120 (seconds)
    metrology__after_error_wait_before_retry   120
 

 	#======== Broks getter in WebUI =========
    # These parameters allow some internal tuning in broks management in WebUI
    
    # Enable or disable late broks sets catchup
    # webui__broks_getter__activate_late_set_catchup                                1
    
    # Take extra broks sets to manage if more than this parameter sets are waiting
    # webui__broks_getter__nb_late_set_allowed_before_catchup                       10
    
    # Stop taking extra broks sets in catchup when we reach this number of broks
    # webui__broks_getter__catchup_broks_managed_by_module_in_a_catchup_loop        200000
    
    # Continue catchup if too much late broks sets remains after
    # webui__broks_getter__catchup_run_endless_until_nb_late_set_allowed_reached    1
 
    # Take the lock as soon as getter thread has some broks to manage
    # in order to attempt to reduce concurrent usage of CPU
    # webui__broks_getter__include_deserialization_and_catchup_in_lock              0

Ces paramètres sont dédiés au fonctionnement interne au module, il est fortement recommandé de ne pas les modifier sans votre support dédié. 

    #======== Extended configuration ========
    # The first file ( in /etc/shinken/_default ) contains the default values provided by Shinken. This file :
    # - will be erased each update/patch
    # - must be present
    # - must not be changed. 
    [OVERLOAD_FROM] /etc/shinken/_default/daemons/brokers/modules/webui.cfg
    [OVERLOAD_FROM] /etc/shinken-user/configuration/daemons/brokers/modules/webui/webui_cfg_overload.cfg